Drop Pro™
250 & 600
Stainless Steel Drop Spreaders

Quick Specs

Select a model:

2.5 cu ft, DPS-250 6.0 cu ft, DPS-600

2.5 cu ft Capacity (Volume)
350 lb Capacity (Weight)

Materials: Salt & Fine Materials
Standard Mounts: 2" Receiver, 3-Point & In-Bed
#: 87535, 87635

Does this Spreader fit my vehicle?

Verify compatibility and part number information

TARGETED SALT APPLICATION WHERE IT MATTERS MOST

Place salt exactly where it’s needed with the stainless steel drop spreaders. The SnowEx^® Drop Pro 250 (2.5 cu yd) and 600 (6.0 cu yd) provide up to 36 inches of spread width in a drop pattern. This keeps the de-icing material on the path and protects sensitive surrounding materials like grass and landscaping. With three mounting systems, these units can fit on most UTVs and compact tractors to make quick work of sidewalks and narrow areas where trucks or compact loaders can’t easily access.

Compatible with UTVs & Tractors

Unique Features

What Sets Drop Pro™ 250 & 600 Apart

Hopper Construction

Stainless steel construction uses heavy-duty rivets and bolts for a clean aesthetic and can withstand extreme stress and corrosive environments
Oil-filled poly bearings ensure dependable operation and eliminate the need for additional grease

Material Delivery

A drop spread pattern puts material exactly where you want it, reduces waste, and protects the surrounding area
Vibrating baffles stay active with every turn, keeping material moving steady

Fitted Lid With Rubber Straps

Fitted Lid With Rubber Straps

The material inside is protected by a custom-molded polyethylene lid that is secured by rubber straps.

Top Screen & Bag Splitter

Top Screen & Bag Splitter

The salt is loaded through and sifted by the 1/4″ stainless steel rod construction with grid top screen. A hinged bag splitter easily pulls up to open bagged rock salt for easy loading. When not needed, the bag splitter can be folded down and out of the way.

Adjustable Baffles (30" to 36")

Adjustable Baffles (30" to 36")

A 36″ spread width makes applications on sidewalks and walking paths easy. When you factor in a 6″ salt leach after application, the SnowEx drop spreaders can treat these surfaces with one or two passes and limit damage to the grass or sensitive surfaces right next to the path. The spread width can be limited to 30″ by activating 3″ baffles on either side of the trough.

Easy Clean-Out

Easy Clean-Out

The entire trough drops open for easy and fast material clean-out when the job is done. Simply open a latch pin on the right and left sides, and the trough will swing backward to empty the hopper of its material. This allows you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job.

Standard Options

Mounts & Controls

Mounts

STANDARD

2" Receiver Hitch

Included With New Spreader Purchase

A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.

STANDARD

3-Point Mount

Included With New Spreader Purchase

The 3-Point Mount includes all installation pins and fits compact tractors and articulating loaders. Its spreaders feature hardware compatible with standard 3-point tractor hitches, a common attachment style also found on other equipment types.

STANDARD

In-Bed Mount

Included With New Spreader Purchase

The spreaders were designed for flat, in-bed UTV mounting. Included brackets and ratchet straps secure the unit. This installation reduces equipment stress by placing weight over the rear wheels instead of behind them, improving maneuverability in tight spaces.

Controls

STANDARD

Variable Speed Control

Included With New Spreader Purchase

Precisely match the weather conditions to the intended material delivery rate with enhanced speed control that includes a single variable-speed control knob to control the material flow rate.

Material compatibility

Close-up view of coarse, white sea salt crystals clustered together, showing their rough, irregular shapes and translucent appearance.

Bagged Salt

See Details

A close-up of numerous small, round, white polymer granules densely packed together, resembling tapioca pearls or a similar granular substance.

Fine Materials

See Details

Accessories

View All Accessories

Side Extensions

Part Numbers

Part Number

#91805

DPS-250 Expands to 4.0 cu ft

#91810

DPS-600 Expands to 8.0 cu ft

1.5 and 2.0 cu ft extension collars are available as an accessory to increase material capacity for UTVs that can handle the additional weight.

LED Strobe Light

Part Numbers

Part Number

#91815

Alerts traffic to your presence, especially during night operations. Plug and play functionality that does not require any additional harnesses and leverages the in-cab control.

LED Work Light

Part Numbers

Part Number

#91820

Provides better visibility at rear of spreader during night applications.

A close-up of a black industrial motor with a U.S. flag sticker and caution label, mounted on a metal bracket and attached to machinery. A power cable is connected to the motor.

Vibrator Kit

Part Numbers

Part Number

#91835

For DPS-250 & DPS-600

Attached to structural cross member, it vibrates the entire unit (tub and sill) to maximize flow of bulk materials.

Specifications

Selecting a model updates product features and specs below.

Metric

Specification	87535	87635
Capacity (Volume)	2.5 cu ft	6.0 cu ft
Spreading Width	30 to 36"	30 to 36"
Approx. Weight (Empty)	130 lb	160 lb
Overall Dimensions (LxWxH)	17" x 42" x 17.25"	20" x 42" x 28"
Hopper Dimensions (LxW)	12.8" x 36.5"	16.75" x 36.5"
Capacity (Weight)	350 lb	650 lb

Specification	87535	87635
Smart Model Number	DPS-250	DPS-600
Vehicle Compatibility	UTVs & Tractors	UTVs & Tractors
Material Compatibility	Bagged Salt / Ice Melt, Fine Materials	Bagged Salt / Ice Melt, Fine Materials
Motors	Direct Drive, 12V, Sealed	Direct Drive, 12V, Sealed