pre-wet pre-wet

HELIXX™
Liquid Kits
100 Gallon, 200 Gallon & 100 gal Expansion

Save Material &
IMPROVE PERFORMANCE

Built for use with SnowEx® HELIXX™ spreaders, the pre-wet tanks are designed for simple, plug-and-play installation. Available in 100 gallon and 200 gallon, with the optional expansion kit that allows for 300 total gallons. The systems include an efficient pump and a spray kit to apply brine to the spreading material as it’s being delivered to the spinner, helping to lower salt usage while increasing its effectiveness. Furthermore, the kit includes spray nozzles that can apply liquids from the tanks directly to the driving surface for anti-icing purposes.

Unique Features

What Sets HELIXX™ Liquid Kits Apart
Close-up of a mechanical pump system with clear flexible hoses and a black cylindrical pump mounted inside a gray metal housing near a yellow component. Wires connect to the pump, and part of a wooden surface is visible below.

12-Volt Motor

A 12-volt motor powers a direct-drive pump capable of 7 GPM. This simple setup results in low maintenance and reliable performance.

A black SnowEx control panel featuring two dials labeled Material Width and Material Flow, an orange digital display in the center, and several white rectangular buttons along the top for efficient material management.

Cab Control

Simply plug the liquid system into the accessory panel and it’s ready to actuate from the spreader’s cab mounted control.

The liquid kits come with a spray bar that can apply brine directly onto the spreading material as it’s being delivered to the spinner for pre-wetting and also includes spray nozzles that can be used for spraying brine directly onto the driving surface for anti-icing applications.

Adds 100 gallons of brine capacity (2 – 50 gallon tanks) to the 200 gallon liquid kit to achieve 300 total gallons. For use with the 11920, 11930 and 11940 HELIXX poly hopper models only.

For use with the 11920, 11930 and 11940 HELIXX poly hoppers, this kit includes four 50-gallon brine tanks, a high-efficiency pump and spray kit.

The 100 gallon expansion tank kit (74630) adds 100 gallons of brine capacity (two 50-gallon tanks) to the 200 Gallon Liquid Kit, allowing HELIXX poly hoppers to carry 300 gallons of brine for pre-wetting or direct liquid application (DLA) use. For HELIXX 3.5 and 5.0 cu yd spreaders only.

Close-up view of a stainless steel industrial machine component with attached hoses and adjustable nozzles, likely part of an automated processing or dispensing system. The setup is clean and well-maintained.

Pre-Wet/Anti-Icing Capabilities

The liquid kits come with a spray bar that can apply brine directly onto the spreading material as it’s being delivered to the spinner for pre-wetting and also includes spray nozzles that can be used for spraying brine directly onto the driving surface for anti-icing applications.

A large white industrial machine with four angular tanks, black support bars, pipes, and cables is viewed from above against a white background, showcasing its intricate engineering.

100 Gallon Liquid Kit

Adds 100 gallons of brine capacity (2 – 50 gallon tanks) to the 200 gallon liquid kit to achieve 300 total gallons. For use with the 11920, 11930 and 11940 HELIXX poly hopper models only.

Top-down view of a white, dual-compartment industrial separator with pipes and fittings connecting the two sections, set against a plain white background.

200 Gallon Liquid Kit

For use with the 11920, 11930 and 11940 HELIXX poly hoppers, this kit includes four 50-gallon brine tanks, a high-efficiency pump and spray kit.

Two white, rectangular tanks positioned upright and connected by a black pipe, each featuring a round opening and valve on top, designed for efficient liquid transfer, set against a plain white background.

100 Gallon Expansion Tank Kit

The 100 gallon expansion tank kit (74630) adds 100 gallons of brine capacity (two 50-gallon tanks) to the 200 Gallon Liquid Kit, allowing HELIXX poly hoppers to carry 300 gallons of brine for pre-wetting or direct liquid application (DLA) use. For HELIXX 3.5 and 5.0 cu yd spreaders only.

Specifications

Selecting a model updates product features and specs below.

Metric
Specification 74610 74620 74630
Capacity 100 gal 200 gal 100 gal (expansion)
Approx. Weight (Empty) 162.5 lb 287 lb 368 lb
Overall Dimensions (LxWxH) 80″ x 57.5″ x 26″ 80.5″ x 64″ x 34.5″ 114.75″ x 64″ x 34.5″